40A HOBBYWING speed controller with Tamiya connector and 21T brushed motor (NiMH and LiPo compatible)
Oil pressure shock absorber with adjustable preload
LED light bar front and rear
SPEED: +/- 35 km/h
Drive:
The 40A HOBBYWING brushed speed controller is waterproof and comes pre-assembled with a Tamiya plug. The controller can be used with 7.2V NiMH or 2S LiPo batteries (up to 30C). Powered by this is a 21T brushed motor which directly accesses an adjustable slipper clutch. The permanent all-wheel drive provides increased traction. The two differentials (front and rear) are driven by an aluminum driveshaft.
The 40A HOBBYWING brushed speed controller is waterproof and comes pre-assembled with a Tamiya plug. The controller can be used with 7.2V NiMH or 2S LiPo batteries (up to 30C). Powered by this is a 21T brushed motor which directly accesses an adjustable slipper clutch. The permanent all-wheel drive provides increased traction. The two differentials (front and rear) are driven by an aluminum driveshaft.
Suspension:
16mm oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 and allow you to optimize the handling and adapt it perfectly to the conditions. Adjustable shock towers made of 4mm 6061-T6 aluminum, anti-roll bars on front and rear axles and independent suspension provide amazing handling and ride.
16mm oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 and allow you to optimize the handling and adapt it perfectly to the conditions. Adjustable shock towers made of 4mm 6061-T6 aluminum, anti-roll bars on front and rear axles and independent suspension provide amazing handling and ride.
Body and Lighting:
The body with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure equalization tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.
The body with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure equalization tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.
The hinged cage provides quick access to the battery. And even in the dark, the ADB1.4 cuts a fine figure thanks to marker lights and an LED light bar at the front (white) and another light bar at the rear (red/orange).
Finally, there is a full-size spare wheel at the rear of the vehicle.
- 4WD all-wheel drive
- 2.4GHz remote control
- Extremely durable composite plastic parts
- Fully adjustable suspension
- Ball bearing drive
- Adjustable 16mm Big Bore shocks
- Steel differential outputs
- 5mm aluminum motor mount
- 5mm aluminum shock towers
- Aluminum driveshaft
- 2 cone differentials (front/rear)
- LED light bar front and rear
- Extremely detailed body with add-on parts
- Vehicle can be powered by 2-cell LiPo batteries (up to 30C)
- Scale: 1:10
- Dimensions (L/W/H): 500x270x165 mm
- Weight: 2060g
- Wheelbase: 290mm
- Ground clearance: approx. 45mm
- Track width: 215mm front / 210mm rear
- Tires front/rear Ø: 110mm / Width: 45mm
- Damper oil: 400CPS
- Damper installation length: 80mm
- Motor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp)
- Dessert Buggy “ADB1.4” Brushed Version
- 2.4GHz Remote Control CR2SV2
- Mini tool kit
- Instruction manual
Avis
Il n’y a pas encore d’avis.